Select Page

SOLID PUMPS

SOLID is high quality & guarante water pump made in Italy, this pumps is almost type & model for explain your work. Pump material is cast iron & stainles steel 304/316. Accessories & part of pumps is always ready on stock, and you can request the impeller of SOLID PUMPS.

Technical Data

  • Flow(Q)  : 3.6 – 21600 m³/h
  • Head(H) : 4 – 350 m
  • Discharge Size : 25 – 400 mm

CENTRIFUGAL SLURRY PUMPS – AHR SERIES

The SOLID AHR pumps series are double casing, cantilever and horizontal centrifugal slurry pumps. Pumps discharge outlet can be positioned at intervals of 45° by request and oriented to any 8 positions to suit installation and applications. Optional shaft seal types is packing seal, expeller seal and mechanical seal. AHR pumps are designed for handling liquids containing abrasive solids or high density slurry, transporting low density and low abrasive slurry with small particles in metalurgy, mine, coal, building material and general industries. This pump can be installed in multistage condition to meet the delivery for long distance and have replacable wear-resistant metal.

CENTRIFUGAL END SUCTION PUMPS – SLO SERIES

The SOLID SLO pump series fully confirms to the European pumps standards DIN24255/BS EN733 and covers all sizes nominated. This standard covers both performance and dimensions. SOLID SLO pump offers users many advantages offer equivalent pumps, because the range incorporates a number of features that improve reliability & performance, while simplifying maintenance and spare parts inventory. SLO pumps has a back pull-out design and when a suitable spacer coupling is fitted to a direct coupled unit, the casing and motor can remain inposition while all other pump parts can be removed for simple and quick maintenance.

Technical Data

  • Flow Rate(Q) : 2 – 2500 m³/h
  • Head(H)         : 2 – 200 m
  • Speed(n)        : 50 Hz – 1450 or 2900 Rpm / 60 Hz – 1750 or 3500 Rpm
  • Temperature(T) : -10°C – 105°C
  • Working Pressure : 10 bar standard, 16 bar optional
  • Test Pressure        : 16 bar standard, 24 bar optional

Technical Data

  • Capacity(Q) : Up to 500 m³/h
  • Head(H)       : Up to 200 m
  • Speed(n)      : 50 Hz – 980 Rpm, 1450 Rpm, 2900 Rpm / 60 Hz – 1180 Rpm, 1750 Rpm, 3500 Rpm
  • Temperature(T) : Up to 105°C
  • Operating Pressure : 10 bar standard, 16 bar on request

CENTRIFUGAL CLOSE COUPLED PUMPS – SLN SERIES

The SOLID SLN pumps series according to the European standards DIN24255/BSEN733 of performance. Pump shaft & motor shaft are close-coupled design. This way of coupling ensures the alignment of pump and motor. Pump impeller run in good balance both dynamically and statically. Therefore pump would be kept very well operation. SLN series designed to be driven by IEC standard motor. Compared SLN pump direct coupled with motor, SLN series are much shorter in length thus takes less space to install and they also can be adjusted into different performance levels through impeller trimming as SLN series pump.

CENTRIFUGAL END SUCTION PUMPS – SLOSS SERIES

The SOLID SLOSS pump series is accordance with international standards of ISO5199/2858, which means SLOSS series pumps are interchangeable with other similiar pumps, conforming to the same standards. This ensures a robust, long lasting, high performing product and optimized hydraulic design with impeller diameter up to 547mm. SLOSS pump have wider performance coverage than EN25199/22858. The axial force are mostly balance by the front/rear wearing rings and balancing holes in impeller design. The residual axial force are balanced by the back arranged contact ball bearings at the drive end.

Technical Data

  • Flow Rate(Q) : Up to 2500 m³/h
  • Head(H)         : Up to 200 m
  • Speed(n)        : Up to 3600 Rpm
  • Temperature(T) : Up to 175°C
  • Working Pressure : 24 bar standard,

Technical Data

  • Flow(Q)  : Up to 3200 L/s
  • Head(H) : Up to 250 m
  • Speed(n) : Up to 3600 Rpm
  • Temperature(T) : Up to 120°C
  • Operating Pressure : 24 bar standard

CENTRIFUGAL END SUCTION PUMPS – SL SERIES

The SOLID SL pumps series accordance with international standards of ISO2858, which means SL series pumps are interchangeable with other similiar pumps, conforming to the same standards. This ensure to robust, long lasting, high performing product and high efficient cast iron volute casing, with flange rated to PN1.6 MPa (16Bar), drilled to ISO7005.2:1988). Reduces shaft deflection standard in 420SS & 304SS, 316SS as an option. Tapered and keyed shaft design allowing ease of removal in maintenance & positive locking whilst in operation.

HORIZONTAL MULTISTAGE SELF-PRIMING PUMPS – HX SERIES

The SOLID HX pump they are suitable for handling pure and turbid liquids without any abrasives. HX pump can handle gas during normal liquid duty. This pump are normally driven by electric mothor, other drives are permissible except belt-drive. HX pump can use in all branches of trade industry and boosting pressure, for providing cooling water, circulating water, feeding boilers, conveying condensate and for running mix or cleaning plants (domestic and agriculture) and can use for irrigation, drainage and sprinkling.

Technical Data

  • Flow Rate(Q) : 4.5 – 150 m³/h
  • Head(H)         : 83 – 200 m
  • Speed(n)        : Max 1800 Rpm
  • Temperature(T) : 120°C
  • Working Pressure : 10 bar standard, 16 bar optional

Technical Data

  • Flow(Q)  : 2.7 – 1000 m³/h
  • Suction Range : 150 mbar
  • Suction Pressure : 140 – 1013 mbar
  • Mechanical Seal  : 200 mm

LIQUID RING VACUM PUMPS – 2BE1 SERIES

The SOLID 2BE1 pumps series is an energy-saving product developed and upgraded based on the technology from Europe and is used to pump the gases which carry no solid undissolved or just slightly dissolved in working liquids. Being simple structure and convenient in maintenance. Using automatic discharge valve, the starting liquid level can be controlled well to prevent over-load starting. By using heat exchanger, working liquid can be used in endless circles reducing the cost of liquids. The cooled working liquid is led inside through its without booster. 2BE1 pumps is applicated for power industry (condenser, negative pressure dedusting), fuel and mines, vacum sorting and filtering.

DOUBLE SUCTION SPLIT CASE CENTRIFUGAL PUMPS – PSH & PSV SERIES

The SOLID SPH & SPV this pump is applicating for waterworks, fire fighting system, irrigation, air conditioning systems, drainage pumping stations, power stations, industrial water supply systems, marine applications as well general applications in refineries. This pumps design has single stage, axially split volute casing pump with double-entry radial impeller, for horizontal or vertical installation. Installation of the horizontal drive either on the left or right side of the pump (optional). Casing standard is cast iron, dutile iron optional.

Technical Data

  • Flow Rate(Q) : Up to 3500 m³/h
  • Head(H)         : Up to 250 m
  • Temperature(T) : Up to 105°C
  • Working Pressure : Up to 25 bar
  • Pump Size      : DN80 up to DN350

Technical Data

  • Flow(Q)  : Maximum 1000 m³/h
  • Head(H) : Maximum 350 m
  • Temperature(T) : -40°C to ± 180°C

VERTICAL MULTISTAGE CENTRIFUGAL PUMPS – SRR SERIES

The SOLID SSR pumps the inline design enables the pump to be installed in a horizontal one pipe system where the suction and discharge ports are in the same horizontal plane and have the same pipe dimensions. This design provides a more compact pump design and pipe work. SSR pump come with various pump sizes and various numbers of stage to provide the flow and the pressure required. This pump are suitable for a variety applications from pumping of potable water to pumping of chemicals.

VERTICAL IN-LINE CENTRIFUGAL PUMPS – SWS SERIES

The SOLID SWS pump series is it shaped on excellent domestic hydraulic models, applies the performance parameter of inline centrifugal pumps and skillfuly built up based common vertical pump. The pump is also a new type and used as hot water, high temperature and corrosive chemical pump and oil pump according to different temperature and mediums. This pump is used for the transportation of pure water and liquids with their chemical and physical properties similiar to water, and for industrial & urban water supply and discharge, pressurized water supply for high transportation.

Technical Data

  • Flow Rate(Q) : 4 – 2000 m³/h
  • Head(H)         : 10 – 300 m
  • Temperature(T) : -20°C to < 240°C
  • Working Pressure : Up to 30 bar

Technical Data

  • Flow(Q)  : 3.6 – 21600 m³/h
  • Head(H) : 4 – 350 m
  • Discharge Size : 25 – 400 mm

CENTRIFUGAL SLURRY PUMPS – AHR SERIES

The SOLID AHR pumps series are double casing, cantilever and horizontal centrifugal slurry pumps. Pumps discharge outlet can be positioned at intervals of 45° by request and oriented to any 8 positions to suit installation and applications. Optional shaft seal types is packing seal, expeller seal and mechanical seal. AHR pumps are designed for handling liquids containing abrasive solids or high density slurry, transporting low density and low abrasive slurry with small particles in metalurgy, mine, coal, building material and general industries. This pump can be installed in multistage condition to meet the delivery for long distance and have replacable wear-resistant metal.

SUBMERSIBLE AXIAL FLOW PUMPS – XCR SERIES

The SOLID XCR Series submersible axial flow pump are a compact unit comprising of submersible motor and pump, capable to pump large capacities at low manometric heads. XCR pump are of heavy type construction of smaller pumping stations, that are more compact, requiring less civil engineering and construction works. It is consisting of bowl with diffuser and suction beelmouth. The propeller type impeller has adjustable blades and is securely fastened on the motor shaft. It features, easy to install and to remove, taking less space for the installation, requiring no priming water, etc.

Technical Data

  • Flow Rate(Q) : 500 – 60.000 m³/h
  • Head(H)         : 10 – 200 m
  • Temperature(T) : 0°C to 50°C
  • Power : 7.5 – 1500 kW

Technical Data

  • Flow(Q)  : 15 – 11.000 m³/h
  • Head(H) : 5 – 150 m
  • Temperature(T) : 0°C to 60°C
  • Power : 0.75 – 710 kW

VERTICAL SEWAGE CENTRIFUGAL PUMPS – XCN SERIES

The SOLID XCN series vertical sewage centrifugal pumps is With single (double) flow channel or single (double) blade structure and the hydraulic without clogging designing, XCN series vertical sewage pumps have the following advantages: Good flow performance, smooth running, small vibration, perfect reliability, easy to install and operate and automatically control. Using the imported bearing, the mechanical seal and the stainless steel shaft makes the pumps with better performance. The pump is widely used in the water supply and drainage of city, the conveying and discharge of sewage, mud, manure, mortar, pulp or in the industrial enterprises and commerce.

VERTICAL TURBINE PUMPS – MSX SERIES

The SOLID MSX series vertical turbine pump is vertical long-shaft pump is the newly developed products with both domestic and overseas relevant manufacturer advantage after years of research. For delivering water, rain water, sewage and sea water with the temperature below 80℃. It is widely used in primary water plant, sewage treatment plant, metallurgical steel industry, power plants, mining, municipal engineering and irrigation and water conservancy engineering. We value the energy saving and environmental protection, by analyzing the requirements of media and operation environment, adopt optimal materials to make the pump operate safely, reliably, economically.

Technical Data

  • Flow Rate(Q) : 15 – 40.000 m³/h
  • Head(H)         : 3 – 150 m
  • Temperature(T) : 0°C to 80°C
  • Power : 7.5 – 3600 kW

Solid Excellence

Strong & Long Life Pumps

Having a thicker body material

Has a large and sturdy central axle

A longer product warranty at least 1,5 year

Pump durability with very solid material inside & outside

Several choices of pump material that can be requested

Several choices of impeller pump material that can be requested

They’re Pumps Material

Other Pumps Material

In some Solid Pumps material also use main material which is cast iron is be capable and more resilient for heavy terrain. This material commonly used in small industries and large industries.

Cast Iron

In Solid Pumps material ussually factories need some better material such as stainless steel 304, for production drinking water and food so that the resulting product also keep clean.

Stainless Steel 304

Finction same as stainless steel 304 material, but here stainless steel 316 is the ebst type of stainless & strong against corrosive. Therefore the durability 316 is longer than 304.

Stainless Steel 316

They’re Pumps Impeller Model

Other Pumps Impeller Model

Commonly used on pumps that flow clean water and ordinary water. Usually often used in household / domestic use. At the Factory, on the Ship and others.

 

Close Impeller

Specifically used to drain sewage and sludge. Open impeller pumps are generally quite expensive and have a large ability to flow through high viscocity flow.

 

Semi Open Impeller

This impeller is generally used for pumps that will flow through the garbage that will be cut into pieces by the cutter impeller & no damage the waste water pump

 

Open Impeller

ORDER NOW FOR SPECIAL PRICE

If you need a different type of pump or type imperfecter, please contact our admin directly. To find out more about products, always check our website SOLID pumps